Italian design, research and development supported by German engines and electronics make the GLG rapid doors an international excellence.
Maximum flexibility
An easy programming unit that can meet the needs of all types of applications.
Exceptional reliability
The mechanics of automation for our industrial closures guarantee a long life cycle of the plant.
Customizable
The numerous combination possibilities, together with the revolutionary control technology and the wide range of accessories, fully meet the needs of the market.
Efficiency in performance
Their 230 V/400 V technology stands out for its high power and vibration-free operation, even with high loads.
Easy to install and easy to maintain
The intelligent and customer-oriented technology guarantees the highest degree of customer satisfaction.
Un nostro referente evaderà la tua richiesta entro 48h dall’invio del modulo per organizzare un primo sopralluogo e redigere una quotazione su misura.
Sconti maggiorati rispetto al listino
Tempi di consegna ridotti
Pagamento di acconto con rate ammortizzabili
Garanzia di 2 anni dall'installazione
Course for technical assembly
This course is designed to provide specific skills to fitters dealing with the installation and assembly of sectional doors and related accessories. The following are the elements of competence, prerequisites, course contents, training methods, evaluation methods, teaching aids, logistics location and timing analysis for the performance of content.
Elements of competence:
Carry out preliminary checks for installation.
Recognize the various elements for the correct installation sequence.
Fasten the rails.
Perform the fastening of the spring assembly.
Make the installation of the mantle and its accessories.
Make the main adjustments for manual operation.
Install the engine and its accessories.
Know how to carry out the testing and commissioning of logistics equipment.
Know the main spare parts.
Carry out scheduled maintenance for the various types of product.
Prerequisites:
Knowledge of product lines and various types of sliding.
Course content:
Theoretical introduction and recommendations.
Explanation of the checks to be carried out on the construction site before opening the packaging.
Opening sequence of the packaging and verification of the elements contained.
Execution of the fixing of the vertical guides.
Mounting the spring assembly on the structure.
Execution of the fixing of the horizontal guides.
Installation of the mantle and its accessories.
Spring loading.
Checking of balance and alignments.
Engine installation and related accessories.
Final testing with the completion of the warranty start-up certificate.
Deepening of the main soft groups.
Deepening of the main engines and related accessories.
Mounting of a mantle with pedestrian door inserted.
Mounting a safety traction.
Test of scheduled maintenance.
Explanation of the reference standards for product supply and installation.
Methods of training:
Frontal exposure moment for the theoretical premise and recommendations.
Demonstration of an installation from the opening of the packaging to the delivery of the warranty start-up booklet.
Moment of frontal exposure for the deepenings.
Demonstration of an installation of a mantle with pedestrian door inserted.
Demonstration of the installation of a safety traction.
Method of evaluation:
Final exercise on the topics carried out through questionnaire with multiple answers.
Didactic supports:
Price list various.
Technical manual sectional doors.
Order form for sectional doors.
Spare parts list.
PowerPoint presentation for theoretical premise and recommendations.
Sectional door packed with motorization.
Panels with examples of soft groups.
Panels with examples of motorization and related accessories.
Mantle with pedestrian door inserted.
Safety traction kit.
Logistics lease:
Classroom. Showroom exhibition products.
Timing analysis for the content:
Theoretical introduction and recommendations. Explanation of the checks to be carried out on the construction site before opening the packaging. Sequence of opening of the packaging and verification of the elements contained. Execution of fixing the vertical guides. Assembly of the spring assembly on the structure. Execution of the fixing of the horizontal rails. Mounting of the mantle and its accessories. Loading the springs. Checking the balance and alignments. Installing the motor and related accessories. Final testing with completion of the warranty start-up certificate. Deepening of the main soft groups. Deepening of the main engines and related accessories. Mounting of a mantle with pedestrian door inserted. Installation of a safety traction. Scheduled maintenance test. Explanation of product reference standards and management of certification documentation on site.
TOTAL DURATION: 2 hours and 40 minutes
Course for sales
This course is designed to provide business-specific skills dealing with the sale of GLG products. Below are listed the elements of competence, prerequisites, course content, training methods, teaching aids, logistics location and timing analysis for the development of content.
Elements of competence:
Know the lines and models produced by GLG.
Know the features of the different types of scrolling available.
Understand how to perform a survey on site.
Be able to make quotes and send orders via the GLG program.
Consult the GLG Extranet for technical information.
Know how to estimate and order the main spare parts.
Know the legal regulations governing the supply and installation of GLG products.
Prerequisites:
No prerequisites are required to attend the course.
Course content:
Explanation of products divided by lines and models.
Deepening of each model and their main characteristics.
Product completion with mandatory and optional accessories.
Explanation of different sliding types and their main applications.
Automation of sliding systems.
Basic technique for measuring measures on site for a sectional door.
Presentation of the program for GLG quotations/orders.
Presentation of the program for quotes/ spare parts orders.
Extranet platform presentation and access mode.
Explanation of the reference standards for product supply and installation.
Methods of training:
Moments of frontal exposure for the main topics of the course.
Case analysis only for the explanation of the program for GLG estimates.
Didactic supports:
Price list various.
Technical manual sectional doors.
Order form for sectional doors.
Spare parts list.
PowerPoint presentation of product lines and templates.
PowerPoint presentation for individual templates, their main features and available accessories.
Presentation in PowerPoint on the automation of sliding systems and their mandatory accessories.
Program for GLG estimates.
Program for exchanges GLG.
PowerPoint presentation on product regulations with technical and professional rules and requirements.
Logistics lease:
Classroom. Showroom exhibition products.
Timing analysis for the content:
General explanation of products divided into lines and models.
Deepening of each individual model and their main characteristics.
Product completion with mandatory and optional accessories.
Explanation of different sliding types and their main applications.
Automation of sliding systems.
Basic technique for measuring measurements on site.
Presentation of the program for GLG quotations/orders.
Presentation of the program for quotes/ spare parts orders.
Detailed explanation of the leading products RolliGO, Vertigo, RolliZIP, Alumina.
Presentation and use of the Extranet.
Explanation of product reference standards.
TOTAL DURATION: 6 hours
PVC Collection
x
RolliGO
See all the colors available for our door wrapping with bars.
Red RAL 3002
Blue RAL 5010
Orange RAL 2004
Light gray RAL 7035
Medium grey RAL 7038
Dark grey RAL 7042
Cream RAL 1013
White RAL 9003
Silver RAL 9006
White grey RAL 9002
Light blue RAL 5012
Black RAL 9005
Anthracite RAL 7016
Blue RAL 5015
Blue RAL 5002
Green RAL 6005
Green RAL 6026
Green RAL 6018
Yellow RAL 1003
Yellow RAL 1021
Repairs and controls close to zero
Very low maintenance
Thanks to our know-how we are able to develop our RolliGO by always attaching them to the adjective lasting in time. Therefore, they require very few extraordinary maintenance since the original project is still based on the first drawings of the founder and continues today to receive updates with the sole purpose of making it both efficient and economical.
Get in touch with our managers. We’ll talk about how many major brands have solved their logistics problems with our doors.
Engineering
Request engineering design tailored to your company.
Course for automations
Competence elements:
Carry out preliminary checks for installation.
Recognize the various elements for the correct installation sequence.
Perform the fastening of the automations.
Attach the various accessories, such as photocells and flashing lights.
Make the main adjustments and connections.
Install the engine and its accessories.
Carry out the testing and commissioning of the motorized door.
Know the main spare parts.
Carry out scheduled maintenance for various types of automation.
Prerequisites:
Basic knowledge of electrical installation and maintenance.
Course content:
Theoretical introduction and recommendations.
Explanation of the checks to be carried out on the construction site before opening the packaging.
Opening sequence of the packaging and verification of the elements contained.
Assembly of various types of towed motors used and relationship between product and engines.
Check the balance suitable for the presence of the engine.
Engine installation and related accessories.
Final testing with the completion of the warranty start-up certificate.
Deepening of the main engines and related accessories.
Test of scheduled maintenance.
Explanation on automation control devices/programmers.
Explanation of the reference standards for product supply and installation.
Methods of training:
Frontal exposure moment for the theoretical premise and recommendations.
Demonstration of assembly of towed motors from the opening of the packaging to the regulation.
Vision of the various educational panels with motors and specific accessories installed.
Moment of frontal exposure for the deepenings.
Front exposure moment for various types of programmers in use.
Method of evaluation:
Final exercise on the topics carried out through questionnaire with multiple answers.
Didactic supports:
PowerPoint presentation for theoretical premise and recommendations.
Projection on screen on the use of programmers.
Educational panels with examples of systems with engines and related accessories.
Logistics lease:
Classroom, showroom exhibition products.
Timing analysis for the content:
Theoretical introduction and recommendations. Explanation of the checks to be carried out on the construction site before opening the packaging. Sequence of opening of the packaging and verification of the elements contained. Execution of fixing the vertical guides. Assembly of the spring assembly on the structure. Execution of the fixing of the horizontal rails. Mounting of the mantle and its accessories. Loading the springs. Checking the balance and alignments. Installing the motor and related accessories. Final testing with completion of the warranty start-up certificate. Deepening of the main soft groups. Deepening of the main engines and related accessories. Mounting of a mantle with pedestrian door inserted. Installation of a safety traction. Scheduled maintenance test. Explanation of product reference standards and management of certification documentation on site.
TOTAL DURATION: 3 hours and 20 minutes
Custom screen printing
x
Vertigo
From logos to the most creative designs, ask us anything you want… our department of teloneria knows no limits.
Collezione PVC
x
RolliZIP
Osserva tutti i colori disponibili per la nostra porta ad avvolgimento autoriparante.
Red RAL 3002
Blue RAL 5010
Orange RAL 2004
Light grey RAL 7035
Medium grey RAL 7038
Dark grey RAL 7042
Cream RAL 1013
White RAL 9003
Silver RAL 9006
White grey RAL 9002
Light blue RAL 5012
Black RAL 9005
Anthracite RAL 7016
Blue RAL 5015
Blue RAL 5002
Green RAL 6005
Green RAL 6026
Green RAL 6018
Yellow RAL 1003
Yellow RAL 1021
PVC collection
x
VertiGO
See all the colours available for our fold-up door.
Red RAL 3002
Blue RAL 5010
Orange RAL 2004
Light grey RAL 7035
Medium grey RAL 7038
Dark grey RAL 7042
Cream RAL 1013
White RAL 9003
White grey RAL 9002
Light blue RAL 5012
Black RAL 9005
Anthracite RAL 7016
Blue RAL 5015
Blue RAL 5002
Green RAL 6005
Green RAL 6026
Green RAL 6018
Silver RAL 9006
Yellow RAL 1003
Yellow RAL 1021
What color do you want?
Standard PVC fabric and colours available (RAL-like)
Red RAL 3002
Blue RAL 5010
Orange RAL 2004
Light grey RAL 7035
Medium gray RAL 7038
Dark gray RAL 676A6C
Cream RAL 1013
White RAL 9003
Silver RAL 9006
White gray RAL 9002
Light blue RAL 5012
Black RAL 9005
Anthracite RAL 7016
Blue RAL 5015
Blue RAL 5002
Green RAL 6005
Green RAL 6026
Green RAL 6018
Yellow RAL 1003
Yellow RAL 1021
Ease of assembly never seen before
Swedish assembly
By means of pre-assembled packaging and tutorials, all the partners of the installation network will have the possibility to keep constantly updated to the rules of simple assembly, for all GLG products.
Convenience from a life
Unparalleled cost effectiveness
Thanks to our R&D department we have been able, for over 40 years, to significantly reduce the production costs of RolliGO, placing it on the market always at a very affordable price. This quick winding door is in fact the simplest and most economical solution to automate the entrances characterized by quick and frequent passages, in any industrial or commercial context.
Italian design, design, research and development supported by German engines and electronics make the GLG rapid doors an international excellence.
Integrated motorisation
400V three-phase Monovelocity with programmable logic and digital absolute control and limit switch.
The installation of a fold-up industrial door can be done with 1kw side motor, 2.2kw front motor or, for dimensions greater than 10 meters, with double synchronous motor, always ensuring a high lifting precision balanced even on large openings.
Tests carried out for ZipGO
EC legislation
Ref. 1
Ref. 2
Result
Wind resistance
EN 12424
13241/CE
Class 2*
Wind speed with moving door
—
—
< 20 m/s (60 km/h)
Standard soundproofing
ISO 170
—
15 dB Rw
Water resistance
EN12426
—
0.11 kPa for closed door – Class 3
Performance
EN 12604
EN 12605
1,000,000 cycles > 200 cycles/hour
* the tests were performed specifically on this basic version of ZipGO. It is possible to improve wind resistance up to Class 4 by circumventing the door’s self-repairability feature.
We contain the draughts
Air sealant ⓘ A development that grants maximum sealing by means of physical adhesion between different materials. For more performant features please see the ZipGO Pharma version, where the details of the cross-section casing and struts have also been designed to allow the least dispersion of steam between environments.
By means of a special insulation system, the ZipGO self-repairing door can transform an open environment to a sealed one. Thanks to a special system that works in adhesion to the upper transverse casing and to a lower band* applied on the weighing bag, it is possible to guarantee an excellent sealing of the dust when the door is closed.
* the band under the weight bag can be selected in physical or magnetic material for better sealing on the ground.
Double modular PVC fabric
The PVC fabric is composed of individual sectors inserted in double ogive profiles. This system allows to replace in case of damage or wear the individual sectors that make up the mantle without having to replace the entire covering.
Noise abatement
By means of this double PVC fabric fold-up door you will be able to reduce and cushion up to 40% the noise of the environment. In addition, to improve the sound-absorbing performance, we recommend the use of insulated sponge cloth.
Multi-engine
To obtain a good fluidity of movement of the crankshaft we have provided, even in the smaller versions, the equipment of a constant propulsion of more than 400V three-phase engines.
Design with double, triple or quadruple synchronous motor, which always guarantees a high precision of balanced lifting, even on large openings.
Ask for more info
Get advice from our sales technicians on all the accessories available for your rapid door.
Discounts and methods reserved for subscribers Account
Information about the PROMO.
Get informed by our consultants about active promotions.
Get in touch with our recruiters, attach your CV for your job application.
Cookie preferences
We use cookies to improve your experience. You can accept, deny, or manage your preferences.
FunctionalAlways on
Technical storage or access is strictly necessary to enable the service requested by the user, or solely to transmit a communication over an electronic communications network.
Preferences
Storage or access is necessary to store preferences that are not requested by the user.
Statistics
Storage or access used exclusively for statistical purposes.
Marketing
Storage or access is required to create user profiles for advertising, or to track users for similar marketing purposes.